2 Cells Battery Charger Apply To NIMH&Lithium Battery With LCD Indicator

Product Detail

Electrical specification

 

4.1 DC input :Micro USB Input:4.8-5.3V   2A

4.2 USB output: 5V1A

• Use Micro USB output:                   

Li-ion              1*2A/1A/0.5A                   

              2*1A/0.5A                            

Ni-MH             2*0.5A      

Tips:

1.In the lithium battery being charged situation, the charger in the use of the default adapter input when the total current is 4A, the total current in the use of micro USB input is 2A.  When the charging current is switched by using the button, the display will automatically switch in the allowed range if the selected total charging current exceeds the default range

2.In Ni MH rechargeable lithium / NIMH charging mode or mixed mode, the current can not be switched automatically set to 0.5A.

3.When the charger for battery failure or anti loaded display "err" characters, please remove the battery in the characters disappear and then into the other battery. The charger switches between lithium and nickel hydrogen battery please remove the original battery and the slot display "NC" after a reload?

4.USB and adapters cannot be inserted simultaneously, otherwise they may burn out of the local or external devices.

 

4.3 Charging display mode:

    1?Does not install the battery to the recharger , after the self check,display 0% and NC.

    2?The simulation indicates the marquee of rechargeable battery?

    3?LCD no change when the battery is loaded back or the input voltage is too high., The system does not work when the When the battery short circuit is shown Err.